BBPRB - ITW DRILLS AND END MILLS

  • MSDS: BBPRB
  • Manufacturer: ILLINOIS TOOL WORKS
  • Product Name: ITW DRILLS AND END MILLS
  • National Stock Number: 6850-00F004177
Product Identification

Product ID:ITW DRILLS AND END MILLS
MSDS Date:01/01/1987
FSC:6850
NIIN:00F004177
MSDS Number: BBPRB

Responsible Party
ILLINOIS TOOL WORKS/PINE BLUFF/AR 71603

Emergency Phone: (501) 536-2233

Cage: 19863

Contractor
ILLINOIS TOOL WORKS/PINE BLUFF/AR 71603

Cage: 19863

Ingredients

TUNGSTEN CARBIDE

CAS: 12070-12-1

RTECS: YO7250000

Fraction By Weight: 97%

OSHA PEL 5 MG/M3/10 STEL (W)

ACGIH TLV: 5 MG/M3/10 STEL (W)


COBALT

RTECS: GB8750000

Fraction By Weight: 30%

ACGIH TLV: 0.1 MG/CUM


TANTALUM CARBIDE

Fraction By Weight: 52%

ACGIH TLV: 5 MG/CUM


CHROMIUM CARBIDE

Fraction By Weight: 5.1%

ACGIH TLV: 0.5 MG/CUM


CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 4.5%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:IRRITATION OF THE NOSE/THROAT.
COUGH/WHEEZING/SHORTNESS OF BREATH/CHEST TIGHTNESS/WEIGHT LOSS.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. SKIN: WASH AFFECTED AREA
W/SOAP & WATER. EYES: FLUSH W/WATER. IF IRRITATION PERSISTS, SEEK
MEDICAL ATTENTION. INGESTION: IF SWALLOWED: DILUTE W/WATER, INDUCE
VOMITING . SEEK MEDICAL ATTENTION.

Fire Fighting

Extinguishing Media:DRY SAND, DRY DOLOMITE, DRY GRAPHITE POWDER.
Fire Fighting Procedures:USE A RESP APPROVED FOR TOXIC DUSTS/FUMES. USE
SCBA.
Unusual Fire/Explosion Hazard:PRODUCT NOT A FIRE HAZARD DUST IS AN
EXPLOSION HAZARD UNDER RARE FAVORING CONDITIONS.

Accidental Release

Spill Release Procedures:VENTILATE AREA OF SPILL. CLEAN UP USING
METHODS WHICH AVOID DUST GENERATION SUCH AS CUUM. WET DUST MOP OR
WET CLEAN-UP. IF AIRBORNE DUST IS GENERATED, USE AAPPROPRIATE NIOSH
APPROVED RESPIRATOR.

Handling

Handling and Storage Precautions:MAINTAIN GOOD HOUSEKEEPING PROCEDURES
TO PREVENT DUST ACCUMULATION DURING GRINDING. AVOID DUSTNHALATION
AND DIRECT SKIN CONTACT WITH DUST.
Other Precautions:WASH HANDS THOROUGHLY AFTER HANDLING BEFORE EATING OR
SMOKING. WASH EXPOSED SKIN AT THE END OF WORK SHIFT. DON'T SHAKE
CLOTHG/RAGS OR OTHER ITEMS TO REMOVE DUST.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESP IF AIRBORNE DUST CONC.
EXCEED BELOW TLV
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV
Protective Gloves:BARRIER CREAM
Eye Protection:SAFETY GLASSES/GOGGLES
Supplemental Safety and Health
MSDS DATE: APRIL 1936.

Chemical Properties

Spec Gravity:15.5
Solubility in Water:INSOLUBLE
Appearance and Odor:DARY GRAY METAL/NO ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS/STRONG ACIDS _
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPROPRIATE
GOVERNMENTAL REGULATIONS. MAY BE SOLD AS SCRAP FOR RECLAIM.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.